Frameless LED edge lit SEG Fabric Light boxes Introduction
It can save products cost comparing backlit structure light boxes generally .
Our state of art led light bulbs can offer high lumens brightness output , we choose Epistar brand in default , CREE and OSRAM brand can be optional
in some specific requirements .
Product Informatin :
LED fabric light box ,
5 years life warranty ,
Epistar LED chip apply ,
90 mm thickness aluminum profiles,
6500K - 9000K color temperature customized,
12 volt / 24 volt safe operation ;
fast delivery 1 - 3 days ;
ultra thin light box series ;
shoppinig malls, subway stations, airports, hotels... wide application
Feature with convenient installation, ultra slim, exquisite and elegant in appearance for this edge lit Fabric Light Box .
17 mm deep saw tooth " U " groove,
corner connect by reinforce slot with thread,
1.5 mm thickness for our aluminum profile, strong enough,
spare clamp position of light source,
structural design of reistant deformation genmetric mechanics,
Silicon rubber strip (SEG),
high power led edge lit light source,
1.08 KGS / Meter in weight.
Led fabric light box edge lit Products Details :
We produce the high quality material of fabric lightbox with anodized silver / black aluminum frames .
17 mm deep "U" slot, design of sawtooth slot, ensure poster is installed tightly,
high stength material 90 degrees corner pieces are tightly and firmly connected,
low cost and easy installation by use of side light source, customer can easily replace themselves .
LED side lighting source with optical lens, even and no dark area , several sizes for choosing .
Using connector to joint the parts.
Assembled by easy steps .
Reduce the packaging volume to save freight charge, expecially for the big size .
Installation step :
1, slide the splicer into patterned groove ;
2, slide the two big connector into slot A;
3, slide one small connector into slot B;
4, install two pieces of corner into slot A;
5, install one corner into slot B;
6, tighten the screw,
7, repeat the same steps at the other sides and corners.
Included Components : aluminum profile, corner with/ without silk, small stitching pieces, inner hexagon spanner, large splicing pieces ...
The optimized lens are designed for this edge-lit frameless fabric light box displays, it can be applied for more narrower aluminum extrusion frames but even illumination ( As thin as 5 mm /2 inches ) .
Edge-lit frame sizes can be large area up to 4 - 5 meters in height and much long in width as requirements like 20 meters , 30 meters ...
With our linkable kits and powerful low voltage adapter supplied .
This Single / Double Sides fabric light boxes use SEG technology, quick fits one face printing graphic or two faces of printing graphics .
- Uniform lighting distribution with hight quaity acrylic optical lens ;
- wall mounted single-sided or free standing / suspended doulbe-sided installation available ;
- anodized milling finishing / black for lightbox frame color ;
- Great replacement for led curtain back lit illumination for cost-effective, easy installation;
- No specialist skill required for change graphic printing ;
- Good performance on visual effects by using our high power edge lights, arractive, vivid ...
- Light in weight and portable for whole kits, zero maintance for storage and care .
- Frameless design by using silicone edge fabric printing, good appearance .
P.S
SEG is a kind of technoloty sewing silicone strips to dye sublimated fabric graphics directly .
These thickness of strips are perfectly matched with light box frames well .
After inserted into aluminum recessed grooves four sides around .
The fabric printings can be fixed to frames well without any screws or other special tools .
Usually there is texitile ring-pull on the fabric graphic .
The silicone strips will loose by pull this up .
In this way old fabric graphics on frameless lightbox can be changed with new printings quickly .
